COVER GRADE & APPLICATIONS: -
The rubber cover should be selected by taking into account the type of material to be handled and the operating condition of the belt. Conveyor belting is available in the following grades and ranging from 150 mm to 2500 mm with Moulded edge 'ME' construction for Cotton Belts and Cut edge construction 'CE' for Nylon & EP Belts in open or endless lengths.
Elevator Conveyor Belts
We manufacture & supply a wide range of Elevator Belts, which is highly acclaimed for its excellent performance. Bucket Elevator Belts are designed for inclined conveyors of material by fixing metal slots or buckets on the carrying surface of the belt at regular intervals.
We manufacture Elevator Conveyor Belts in 34 Oz Hard Duck Cotton as well as in Nylon plies.
Proper Belt Width
- For buckets up to 16" wide (400mm), the belt should be at least 1" (25mm) wider than the buckets.
- For buckets wider than 16" wide (400mm), the belt should be at least 2" (25mm) wider than the buckets.
Proper Pulley Face Width
- For belts up to 12" (300mm) wide, the pulley face width should be at least 1" (25mm) wider than the belt.
- For belts greater than 12" (25mm) wide, the pulley face width should be at least 2" (50mm) wider than the belt.
Head Pulley Lagging
- The installation of high quality rubber lagging is recommended to provide the highest coefficient of friction between the belt and the pulley, thereby maximizing the driving force and eliminating belt slippage. Lagging also aids in cushioning the impact of the buckets on the head pulley