COVER GRADE & APPLICATIONS: -
The rubber cover should be selected by taking into account the type of material to be handled and the operating condition of the belt. Conveyor belting is available in the following grades and ranging from 150 mm to 2500 mm with Moulded edge 'ME' construction for Cotton Belts and Cut edge construction 'CE' for Nylon & EP Belts in open or endless lengths.
General Purpose Conveyor Belts
General Purpose Conveyor Belts are suitable for light to heavy-duty bulk handling applications where resistance to abrasion, impact, slicing and gouging is required. Top and bottom rubber cover compounds are comprised of different polymers and fillers, which offer resistance to abrasion and impact to provide maximum protection for the belt carcass. These General Purpose Belts provide high operational reliability and durability.
Grade - N17
- Application Characteristics
-
Moderately abrasive and non abrasive materials.
-
- Conforming to Standards
-
IS 1891 (Part I), BS 490 (Part I), DIN 22102, IPSS-2-03-006.
-
- Recommended For
-
Rubble, Sand (sharp), Cement (ground), Clay, Slacked Lime, Charcoal, Super Phosphate (lump and powder), Coal, Ashes, Soda Earth, Sand (smooth), Pulp (dry) etc.
-
- Reinforcement Material
-
NN, EP
-
Grade - M24
- Application Characteristics
-
High tensile strength, superior in abrasion and cut resistance. Transporting highly abrasive materials.
-
- Conforming to Standards
-
IS 1891 (Part I), BS 490 (Part I), DIN 22102, IPSS-2-03-006.
-
- Recommended For
-
Limestone, Metallic Ores, Granite, Quartz, Sand, BF Clinker and Slag, Stone Chips Slate, Coke, Sinter Gravel etc.
-
- Reinforcement Material
-
NN, EP
-
The Essential Characteristics of GI™ Conveyor Belts
- High tensile resistance with low elongation.
- Good troughing and impact resistance.
- High flexibility of the carcass fabric to prevent bucking while wrapping on pulleys.
- Available up to 2500 mm width and any number of plies.
- Good interface adhesion of components for better flex life.
- Better load carrying over long haulage.
- Available in Moulded Rubber or Tough Slit Edge finish.
- Resistance to environmental operating conditions.
- Resistance to heat and to high environmental temperatures.
- Resistance to chemical products such as acid, oxidizing agents even at significant concentrations.
- Good surface electrical conductivity, good resistance to fire and flame propagation.