COVER GRADE & APPLICATIONS: -
The rubber cover should be selected by taking into account the type of material to be handled and the operating condition of the belt. Conveyor belting is available in the following grades and ranging from 150 mm to 2500 mm with Moulded edge 'ME' construction for Cotton Belts and Cut edge construction 'CE' for Nylon & EP Belts in open or endless lengths.
Heat Resistant Conveyor Belts
Heat Resistant Conveyor Belts are required for transporting materials above temperature of 60°C upto 180°C. These belts are mainly used for handling material like Hot Sintered Ores, Steel Pallets, Phosphate, Steel Clinker, Mining & Plants Handling Copper, Aluminum, Brass and Iron Ores, Mineral Mining & Plants Handling Bauxite, Manganese, Graphite, Coal, Lignite, etc.
We maufacture Heat Resistant Conveyor Belts in three different categories as following: -
Grade - HR (Heat Resistant)
- Application Characteristics
-
Heat and abrasion resistant. Lump 125°C (max). Fines 100°C (max).
-
- Conforming to Standards
-
IS 1891 (Part II)
-
- Recommended For
-
Very good for general hot and moderately abrasive materials.
-
- Reinforcement Material
-
NN, EP
-
Grade - SHR (Super Heat Resistant)
- Application Characteristics
-
Heat and abrasion resistant. Lump 150°C (max). Fines 125°C (max).
-
- Conforming to Standards
-
IS 1891 (Part II)
-
- Recommended For
-
Best for general hot materials and services such as - steel clinker, hot sintered ores, steel pallets and others.
-
- Reinforcement Material
-
NN, EP
-
Grade - UHR (Ultra Heat Resistant)
- Application Characteristics
-
Super Heat and abrasion resistant. Lump 180°C (max). Fines 180°C (max).
-
- Recommended For
-
Best for extremely hot, abrasive and ambient temperature materials. Conveyed towards Sinter Plant / Furnace / Smelter Plants, Handling Lead, Zinc, Steel & Alloys Rolling Plants, Mining & Plants Handling Copper, Aluminum, Brass and Iron Ores, Mineral Mining & Plants Handling Bauxite, Manganese, Graphite, Coal, Lignite, etc.
-
- Reinforcement Material
-
NN, EP
-
The Essential Characteristics of GI™ Conveyor Belts
- High tensile resistance with low elongation.
- Good troughing and impact resistance.
- High flexibility of the carcass fabric to prevent bucking while wrapping on pulleys.
- Available up to 2500 mm width and any number of plies.
- Good interface adhesion of components for better flex life.
- Better load carrying over long haulage.
- Available in Moulded Rubber or Tough Slit Edge finish.
- Resistance to environmental operating conditions.
- Resistance to heat and to high environmental temperatures.
- Resistance to chemical products such as acid, oxidizing agents even at significant concentrations.
- Good surface electrical conductivity, good resistance to fire and flame propagation.